Wailbone X2 Deluxe Splitter

It started when I wanted a fatter low end on my tone. I would send my signal to a tuner pedal with 2 outputs, and started using a bass amp and guitar amp simultaneously. I fell in love with that tone, but hated having a tuner at the end of my chain, so I built a simple pedal with an input, an always-on output and 2 toggled outputs for my amps.

Put it at the beginning of a chain to use two rigs at once, at the end of your chain to toggle 2 amps, or get weird and put in in the middle of the chain to separate your distorted and modulated signals. This pedal is a gives you a lot of potential to experiment with and squeeze the most interesting tones out of the gear you already own.

This deluxe version also features a momentary switch in the middle, which can function as a momentary kill switch or as a tap tempo. Point the white switch toward the center of pedal to use it as a kill switch, and away from the center to use it as a tap. The black switch toggles between normally open (away from center) and normally closed (toward center).

The finish on this pedal is a 1-off and will not be available again. I was originally going for a simple spatter effect and it morphed into a sorta Martian look. It's a little chaotic, but if you're like me you won't mind.

The jacks on the (from left to right) are for input, tap tempo output, output 1, and output 2. Output 1 is toggled with the right footswitch, and output 2 is toggled with the left. With the exception of the LEDs, the circuit is completely passive, and can operate as normal without power. Takes 9V 100mA, center negative. A barrel jack to 9V battery adapter is included.